Shop Online
Prices
Partners
Links
English: Home German Polish

Meet us at

BOOT Düsseldorf

17-25 Januar 2009

Hall 11 Stand C 28

 
 
 
 
 

 

100% made in Germany

 

elTrim GmbH

Egerstr 4

D-58256 Ennepetal

Deutschland

Tel. +49 (0)2333 7720

Fax. +49 (0)2333 89553

info@eltrim.com

  PRODUCTS

ELECTRIC TRIM TABS automatic or manual with position indication

Electric Trimtabs will:

    • Allow a boat to have a slower planning speed, often essential for rough weather.
    • Adjust the trim of your boat to show the designed angle of attack.
    • Fetch your boat onto the plane faster, reducing fuel consumption at 'hump' speeds
    • Effectively add length to the hull, which can result in an improvement in performance    and handling
    • Reduce the amount of heel in order to show the maximum amount of 'Vee', to the water rather than landing of the side of the ‘Vee', reducing both hull stress and the passenger stress of uncomfortable cruising.
 

elTrim-AUTOMATIC (with automatic elimination of heeling)

Main functions HF or OL, (factory setting HF)
The top push-button moves both tabs down so the bow moves down. The lower button will raise both tabs, so the bow will raise  Right button: starboard side moves down. Left button: portside moves down. Position of tabs are shown by LED- lights.

 

eltrim_automatic

OL Function type
In the function OL the raising of the tabs is disconnected. This is preferred for displacement boats.
The function HFsupports an easy start of the boat to move into the planning position. You start with tabs down and switch the automatic on just before the boat moves into gliding position. The tabs will raise and the heeling correction works at once. At worst you only have to correct the driving position of the bow.

The elTrim automatic N has an additional speed switch supplied, which activates the automatic as planning speeds are approached also raising the tabs as the boat accelerates. Factory setting is 10 knots, adjustable in the pressure switch unit.
The tabs may be moved by hand at any time

   

elTrim ST with position indication - standard solution

eltrim_STandard_manual

Operating of tabs is manual.

The top push-button moves both tabs down so the bow moves down.

The lower button will raise both tabs, so the bow moves up 

Right button: starboard side moves down. 

Left button: portside moves down.

Position of tabs are shown by LED- lights

 

elTrim WO without position indication - Budget solution to start with.

Eltrim_WO

The position of the tabs is not visible.

You can move each tab by a separate switch.

Upgrade to other models automatic or ST is possible

at any time.

3 years Warranty

Units supplied with all components and cables, ready for installation

eltrim_unit

Small and compact

Size of control unit 90 x 90 mm,

Hole size for mounting in instrument panel: 75 x 75 mm,

Depth 60 mm

For boats with a flybridge there is a separate control unit available
Other sizes of tabs are available on request.

For less powerful engines or heavy weight in the stern the next larger type is advised

Our units are delivered fully complete with all components and cables, ready for fitting.

The power connection has to be made at the ignition switch or through power supply unit using our supplied cables (see wiring diagrams).

There is no hydraulic unit required.

Drive units 12V or 24V made from reinforced fiberglass plastic, welded water resistant and pushrods covered by EPDM-bellows to avoid marine fouling.